TECHNICIAN

Location: Novi, MI
Date Posted: 03-08-2017
 
 
 
Setup and operate equipment to assemble, inspect, and rework prototype and service electronic products within the Pilot Factory:
 
• Setup and monitor solder paste screen printer
 
• Setup, load and replenish machine feeders for surface mount equipment
 
• Interpret X-ray PCBA inspection machine data
 
• Visually inspect PCBA’s for part population, solder joints, part polarity and other defects
 
• Repair solder joints to IPC 610 standard
 
• Rework PCBA’s by adding, deleting or changing parts
 
• Setup and operate radial insertion machine
 
• Setup and operate wave soldering and Select soldering machines
 
• Setup and operate conformal coat/hot melt machine
 
• Operate router to remove PCBA from panel
 
• Assemble PCBA’s into radios or amplifiers
 
• Repair or rework PCBA’s by soldering
 
• Provide support to Material Control Technician in picking and returning parts
 
• Count parts during annual inventory
 
• Operate software flashing equipment
 
• Knowledge of Personal Computers, Microsoft Outlook/Word/Excel
 
• High School Diploma or GED
  1. Setup and operate equipment to assemble, inspect, and rework prototype and service electronic products within the Pilot Factory:
 
• Setup and monitor solder paste screen printer
 
• Setup, load and replenish machine feeders for surface mount equipment
 
• Interpret X-ray PCBA inspection machine data
 
• Visually inspect PCBA’s for part population, solder joints, part polarity and other defects
 
• Repair solder joints to IPC 610 standard
 
• Rework PCBA’s by adding, deleting or changing parts
 
• Setup and operate radial insertion machine
 
• Setup and operate wave soldering and Select soldering machines
 
• Setup and operate conformal coat/hot melt machine
 
• Operate router to remove PCBA from panel
 
• Assemble PCBA’s into radios or amplifiers
 
• Repair or rework PCBA’s by soldering
 
• Provide support to Material Control Technician in picking and returning parts
 
• Count parts during annual inventory
 
• Operate software flashing equipment
 
 
MUST BE A US CITIZEN Will need to pass a soldering test Will work days, but may get moved to 2nd or 3rd. 
 
 
 
• 2+ years work experience in an electronics manufacturing environment
 
 
• The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The employee frequently is required to reach with hands and arms. The employee is frequently required to stand and walk. The employee must be able to lift up to 50 lbs.
 
 2+ years work experience in an electronics manufacturing environment.
 
• High School Diploma or GED
or
this job portal is powered by CATS